Useful Scripts to Copy and Paste

These have saved me a ton of time

Script 1: Batch convert [.svg / .pdf / .eps / .emf / .wmf] files to [.eps / .pdf / .png / .svg] Very useful for writing papers and standardizing file types https://gist.github.com/JohannesDeml/779b29128cdd7f216ab5000466404f11

:: From https://gist.github.com/JohannesDeml/779b29128cdd7f216ab5000466404f11
:: Convert vector file formats in the current folder and their subsfolders
:: The variables in the beginning can be changed to your needs
:: Tested for Inkscape 1.0 - 1.3

@echo off
setlocal ENABLEDELAYEDEXPANSION

:: Define supported input file extensions
set validInput=svg pdf eps emf wmf ps ai cdr

:: Define supported output file extensions
:: All supported extnesions: [.dxf, .emf, .eps, .fxg, .gpl, .hpgl, .html, .jpg, .odg, .pdf, .png, .pov, .ps, .sif, .svg, .svgz, .tar, .tex, .tiff, .webp, .wmf, .xaml, .zip]
set validOutput=svg png tiff jpg webp pdf eps emf wmf ps cdr

:: Define relative output folder, if you want to write to the same folder set the var to an empty string
set relativeOutputFolder=out\

:: Possible paths to check for the installation
set "inkscapePaths[1]=C:\Program Files\Inkscape\bin\inkscape.com"
set "inkscapePaths[2]=C:\Program Files\Inkscape\bin\inkscape.exe"
set "inkscapePaths[3]=C:\Program Files\Inkscape\inkscape.com"
set "inkscapePaths[4]=C:\Program Files (x86)\Inkscape\bin\inkscape.com"
set "inkscapePaths[5]=C:\Program Files (x86)\Inkscape\bin\inkscape.exe"
set "inkscapePaths[6]=C:\Program Files (x86)\Inkscape\inkscape.com"
set "inkscapePaths[7]=%UserProfile%\scoop\apps\inkscape\current\bin\inkscape.exe"

set "inkscapePath="
set /a "pathIndex=1"

:: Find the inkscape installation path
:inkscapepath_loop_start
if defined inkscapePaths[%pathIndex%] (
	set "currentPath=!inkscapePaths[%pathIndex%]!"
	if exist "!currentPath!" (
		:: found installation path
		set "inkscapePath=!currentPath!"
		goto :inkscapepath_loop_end
	)
	set /a "pathIndex+=1"
	goto :inkscapepath_loop_start
) else (
	echo Can't find Inkscape installation, aborting.
    goto end
)
:inkscapepath_loop_end

:: Set the path to allow for spaces without any needed additional quotes
set inkscapePath="%inkscapePath%"

set validInputString=
(for %%a in (%validInput%) do ( 
   set validInputString=!validInputString!, %%a
))
:: Remove the leading comma
set validInputString=%validInputString:~2%

set validOutputString=
(for %%a in (%validOutput%) do ( 
   set validOutputString=!validOutputString!, %%a
))
:: Remove the leading comma
set validOutputString=%validOutputString:~2%

:: If this can't be run, then the version is an older one
FOR /F "tokens=* USEBACKQ" %%g IN (`%inkscapePath% --version`) do (SET "inkscapeVersion=%%g")
if "%inkscapeVersion%" EQU "" (
	set inkscapeVersion=0.x
	set /a inkscapeMajorVersion=0
) else (
set /a inkscapeMajorVersion=%inkscapeVersion:~9,1%
)

echo.
echo This script allows you to convert all files in this folder from one file type to another
echo Running with %inkscapeVersion% from %inkscapePath%
echo (type q to quit at any question)
echo.

set valid=0
echo Allowed file types for source: %validInputString%
:whileInNotCorrect
	set /p sourceType=What file type do you want to use as a source?
	if "%sourceType%" EQU "q" exit /b
	for %%a in (%validInput%) do (
	  if "%%a"=="%sourceType%" (
		set valid=1
		goto inSet
	  )
	)
	if %valid% EQU 0 (
		echo Invalid input! Please use one of the following: %validInputString%
		goto :whileInNotCorrect
	)

:inSet
echo.

set valid=0
echo Allowed file types for output: %validOutputString%
:whileOutNotCorrect
	set /p outputType=What file type do you want to convert to? 
	if "%outputType%" EQU "q" exit /b
	for %%a in (%validOutput%) do (
	  if "%%a"=="%outputType%" (
		set valid=1
		goto outSet
	  )
	)
	if %valid% EQU 0 (
		echo Invalid input! Please use one of the following: %validOutputString%
		goto :whileOutNotCorrect
	)

:outSet

if "%outputType%" EQU "%sourceType%" (
	echo Input and Output are the same, no point in doing anything. Exiting...
	exit /b
)

echo.

:: Set DPI for exported file
:whileNotValidDpiNumber
	set /p dpi=With what dpi should it be exported (e.g. 300)? 
	if "%dpi%" EQU "q" exit /b
	IF %dpi% NEQ +%dpi% (
		echo Invalid input! Please input an actual number.
		goto :whilenotValidDpiNumber
	)
echo.

:: count how many files we need to convert before converting!
set /a total=0
for /R %%i in (*.%sourceType%) do (	set /a total=total+1 )
echo Found %total% file(s) of type *.%sourceType% in the current folder (%~dp0)

echo.

:: Create output folder if it is set and does not exist
if not "!relativeOutputFolder!"=="" (
	if not exist "!relativeOutputFolder!" mkdir "!relativeOutputFolder!"
)

set /a count=0
:: Running through all files found with the defined ending
if %inkscapeMajorVersion% NEQ 0 (
	:: Inkscape 1.0 and newer
	for /R %%i in (*.%sourceType%) do (
		set /a count=count+1

        echo %%i -^> %%~di%%~pi!relativeOutputFolder!%%~ni.%outputType% ^[!count!/%total%^]
        %inkscapePath% --export-filename="%%~di%%~pi!relativeOutputFolder!%%~ni.%outputType%" --export-dpi=%dpi% "%%i"
	)
)

echo.
echo %count% file(s) converted from %sourceType% to %outputType%! (Saved in out folder)
echo.

:end
pause

Script 2: Export When2Meet to a CSV Open up the developer console in your browser and run the linked code. You can then paste the data into excel and go from there https://gist.github.com/aculich/b60c9e79e7a1113393127c51701f2d7b

function getCSV() {
  result = "Time," + PeopleNames.join(",")+"\n"; 
  for(let i = 0; i < AvailableAtSlot.length; i++) {
      let slot = $x(`string(//div[@id="GroupTime${TimeOfSlot[i]}"]/@onmouseover)`);
      slot = slot.match(/.*"(.*)".*/)[1];
      result += slot + ",";
      result += PeopleIDs.map(id => AvailableAtSlot[i].includes(id) ? 1 : 0).join(",");
      result+= "\n";
  }
  console.log(result);
  return result;
}
copy(getCSV()); // automatically copy results to clipboard